2. Strip the wires
Inside the cable, you’ll find several wires. The ones you need are the red wire (positive) and the black wire (negative), which carry the current.
3. Connect to the battery holder
Attach the red wire to the positive terminal of the battery holder and the black wire to the negative terminal. Secure the connections with electrical tape to avoid short circuits.
4. Insert the batteries
Place the AA batteries in the holder, making sure they’re properly aligned with the correct polarity.
5. Connect to your phone
Plug the USB end into your phone. If everything’s connected correctly, your phone should start charging.
Warnings and Tips
- This charger is for emergency use only. Avoid using it for long periods, as AA batteries drain quickly and the voltage isn’t regulated like a store-bought charger.
- Don’t reverse the polarity of the wires or batteries—it could damage your phone.
- For extra safety, you can add a voltage regulator to the system.
Conclusion
Making your own portable phone charger in five minutes is not only doable—it’s practical. It won’t replace your regular charger, but in a pinch, this DIY hack can be a real lifesaver. With a bit of creativity and some everyday materials, you can keep your devices alive even when the unexpected strikes.
